*5 HYDRAULIC CRACK FILL (MMHCF)

Description

*5 Hydraulic Crack Fill (MMHCF)

WORKS WITH NEEDLE SIZES

4 – 6 – 8 – 10 – 12 gauge

 MATERIAL FOR  USE WITH:

MICRO GROUTING & INJECTION KIT                

MICRO GROUTING & INJECTION CONSERVATORS KIT

MORTAR GUN KIT 2          

MORTAR GUN KIT 3 (NEEDLES ONLY)

ELECTRIC GUN KIT (NEEDLES ONLY)

Ultra fine sheared and sieved crack filler based on Natural Hydraulic Lime with fine fillers for use where fine cracks and fissures are subjected to severe weathering and long term periods of wet or freezing conditions. Mix 500ml clean potable  water with 1 KG of the Hydraulic Lime Crack fill and mix with a high speed mixer with the recommended mixing paddle for 2 minutes. Allow to stand for 10 minutes and  remix for a further 3 minutes. Inject via the recommended equipment into the crack or network of cracks that have been pre- cleaned to a damp but not wet state. Pilot holes 3.5mm maximum (non-percussive) may be required to drill into the cracks to a depth of at least 75% of the crack depth and at intervals along the crack length to ensure the crack is adequately filled.

CARTRIDGE REFILL (APPROX) WATER CONTENT = 200ml

20Kg BAG (APPROX) WATER CONTENT = 10Ltrs