Edinburgh | Glasgow | Fife | National Sales

CHISELS & ACCESSORIES

  • CARBIDE TIPPED CHISEL (MELL HEAD)

    £25.99£55.99 + VAT
    Tungsten Carbide Tipped CHISEL (Mell Head)
    Sizes 3mm / 6mm / 10mm / 13mm 20mm / 25mm / 38mm / 50mm These chisels are approximately 8" long, have a mushroomed Mallet head, to prevent damage to your mallet. These Chisels are made from High Carbon Tool Steels and have a Tungsten Carbide Tip Fused into them. The TCT tip is very hard, suitable for Marble and Sandstone to resist wear and keep a fine cutting edge for longer. (Not advised for use on  Granit.) All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
  • Tungsten Carbide Tipped Stone Pitching Tool
    Size - 50mm (HAMMER HEAD) Pitching Chisels are made extra heavy duty for the toughest of requirements. They are made from high carbon tool steels, and have a super tough Tungsten Carbide tip. The chisel has ample support for the tip to give this tool a long life, where as some can fail due to lack of support behind the tip. This is a Pitcher for Stone, so it has Harder to the 2 Pitcher tips, this keeps the tool sharper for longer. Approximately 9" long, they have a flat hammer head for a large striking area. All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
  • CARBIDE TIPPED CHISEL (POINT)

    £33.99£35.99 + VAT
    Carbide Tipped Point Sizes: 13mm / 16mm / 19mm
    These chisels are approximately 8" long, are made from High Carbon Tool Steels, and have a cylindrical pointed tip fused into the cutting end. The size stated is the diameter of the Octagonal shank Flat-to-Flat. This tool has a Mushroomed Mallet Head to prevent damage when used with Nylon/Wooden Mallets.
    All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
  • CARBIDE TIPPED CHISEL (PUNCH)

    £33.99£35.99 + VAT
    Carbide Tipped Punch
    Sizes: 13mm / 16mm / 19mm These chisels are approximately 8" long, are made from High Carbon Tool Steels, and have a cylindrical pointed tip fused into the cutting end. The size stated is the diameter of the Octagonal shank Flat-to-Flat. This tool has a Mushroomed Mallet Head to prevent damage when used with Nylon/Wooden Mallets, All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
  • Tungsten Carbide Tipped Masoning Claw Chisel Point
    Sizes: 5 Tip / 10 Tip These tools are a more durable alternative to scutch combs for those of you who use them for carving and shaping. Depending on size they have individually fused tips for each of the teeth, thus preventing premature tip failure. This particular claw is a pointed claw, which has cylindrically pointed tips in for a finer finish. These tools are approximately 8" long and come with a Ball head for use with mallets and are finished in Deep Red. All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
  • Tungsten Carbide Tipped Masoning Claw Chisel Flat Sizes: 5 Tip / 10 Tip These tools are a more durable alternative to scutch combs for those of you who use them for carving and shaping. Depending on size they have individually fused tips for each of the teeth, thus preventing premature tip failure. This particular claw is a Flat Claw, which has chisel edge tips in for a courser finish. These tools are approximately 8" long and come with a Ball head for use with mallets and are finished in Grey/Blue. All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
  • Carbide Tipped Scriber (HAMMER HEAD) Masoning Scribe. All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
  • FIRESHARP CHISEL (HAMMER HEAD)

    £17.49£27.49 + VAT
    Firesharp Chisel (Hammer Head) Sizes 3mm / 6mm / 10mm / 13mm / 20mm / 25mm / 38mm / 50mm All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
  • Scutch Comb Holder
    Sizes from 0.5"(13mm) & 1"(25mm) & 2"(50mm) HAMMER HEAD Sizes from 0.5"(13mm) & 1"(25mm) & 2"(50mm) MELL HEAD Scutch Holders / chisels from 1/2" wide up to 2" wide, with options of Hammer head or Mallet Head. These tools are made from High Carbon Tool Steels to withstand the work load for which they are used. Combs are simply knocked or pressed into the end for use, and then knocked out sideways when they need changing. All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
  • Scutch Combs (Teeth) Sizes from 0.5"(13mm) & 1"(25mm) & 2"(50mm) All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
  • Firesharp Point / Punch (Hammer Head) Size - 9"(225mm) All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
  • Firesharp Lifter (Hammer Head) Size - 9"(225mm) All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
  • Out of stock
    Firesharp Chisel (Masons Pitching Hammer Head) Sizes - 2.5 (63mm) All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
  • Firesharp Chisel 63mm (Heavy Duty Nicker) (Hammer Head) SIZE 2.5" (63mm) All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
  • MASONS PEG

    £5.49 + VAT
    Masons Peg All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
  • PLUGGING CHISEL

    £5.99 + VAT
    Plugging Chisel All Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
X