A fast application and finishing ready mixed mortar based on Natural Hydraulic lime specially formulated to work on all backgrounds, including light weight cement blocks, clay blocks, bricks and stone, to achieve excellent waterproofing, low capillarity, high breathability, elasticity and vibrant coloured finishes. Can be supplied to a custom colour with substantial savings in cost of painting and maintenance.

Storage/shelf life:
In dry store, up to 12 months from production date. Reseal opened bags a.s.a.p.

Mortar preparation:
Add between 5.5 and 6 (max) litres of clean water par bag of 30 kg.Mix for maximum 10 minutes.

Application recommendations:
On properly prepared background offering adequate keying, cast on or spray on a minimum of 10 mm in one pass for floated finishes or a minimum of 15 mm if a scratched finish is required. On waterproofed or smooth backgrounds spray or cast on a 1st bonding coat of about 3 mm adding 500 grams of SBR per bag of product. Straighten the work immediately after with an appropriate tool. Float (sponge, wooden or plastic) after 2-3 hours or more depending on weather conditions.
Do not work in temperatures below 5oC or above 30oC. Protect fresh mortar from rain, frost or strong drying wind. In hot weather, dampen the background adequately and cure the work by applying a light water mist several times for a period of 72 hours.
When Thermocromex is applied as a finishing coat on an existing backing coat, the maximum thickness for floated finishes is 5-6mm or 6-8mm for scratched finishes. Please refer to: Thermocromex application recommendations

The above details are for general information purposes and do not constitute a specification.